All Imaging Modules and Systems

Gamma-Spect-2×2

Gamma-Spect-2×2

Applications and
technologies: Hyperspectral x-ray and gamma-ray imaging, single photon counting, energy resolved counting, photon timing, energy spectroscopy, imaging.
For: science, nuclear science, x-ray scanning, gamma-spectroscopy, nuclear medicine, pre-clinical research
Sensitive area: 26-cm2 (5.1cm x 5.1cm)
Intrinsic spatial resolution: 1.6 mm pixel pitch
Number of pixels: Available options: 256 (16x16) to 1024 (32x32)
Sensor material: CZT
Energy range: Two options 20 keV to 350 keV, and
20 keV to 700 keV
Energy resolution: 6keV full-width half maximum (FWHM)
Trigger threshold: Programmable
Data interface: List mode digital data via Ethernet UDP/IP
Power: 8W
Gamma-Spect-5×5

Gamma-Spect-5×5

Applications and technologies: Hyperspectral x-ray and gamma-ray imaging, single photon counting, energy resolved counting, photon timing, energy spectroscopy, imaging. For: science, nuclear science, x-ray scanning, gamma-spectroscopy, nuclear medicine, pre-clinical research
Sensitive area: 26-cm2 (5.1cm x 5.1cm) to 163 cm2 (12,7 cm x 12,7 cm)
Intrinsic spatial resolution: 1.6 mm pixel pitch
Number of pixels: Available options: 1024 (32x32) to 6400 (80 x 80)
Sensor material: CZT
Energy range: Two options 20 keV to 350 keV, and 20 keV to 700 keV
Energy resolution: 6keV full-width half maximum (FWHM)
Trigger threshold: Programmable
Data interface: List mode digital data via Ethernet UDP/IP
Power: 8W
GDS-100

GDS-100

Applications: Gamma spectroscopy, isotope identification, Comptron imaging, detector analysis, hot spot locator.
Detector type: Cadmium Zinc Telluride (CZT)
Detector dimensions: 22 mm x 22 mm x 10 mm
Number of detectors: 1-4
Pixels: 11x11 anode array, 1 large cathode
Energy range: Four programmable ranges from 20 kev up to 0.7, 3, 7, 9 MeV
Power consumption: Ca 5 W
Voltage: 12 V
Data interface: List mode digital raw data via Ethernet UDP/TCP
Count rate: 12 kcps
INX-500

INX-500

Detectors: CZT, 2-mm or 5-mm thick
Application: Industrial X-ray, NDT, Process Flow Tomography, Fluid-Dynamics Analysis
Number of pixels: Up to 1024
Scalable: Yes, up to several meters
Frame rate: Up to 50 000 samples/s
Input charge range: Several 100keV
Pixel pitch: 800μm or 1.6 mm
Data interface: Ethernet, TCP/UDP
Power consumption: 12 W
Dimensions: 204.8 mm x 12.8mm for 1.6um pixel pitch
NORM – Space Radiation Monitor

NORM – Space Radiation Monitor

Application: Measuring kinetic energy for energetic charged particle radiation in space
Power consumption: 3W
Dimensions: Sensor unit (DGU): 148,5 x 76 x 68 mm Processing unit (DHU): 140 x 140 x 65 mm
Energy range: Electrons: 0.5 - 7 MeV, 9 log bins Protons: 7 - 200 MeV, 9 log bins
Detector technology: Particle telescope: stack of 9 Si diodes and Al/Ta absorbers
Data interfaces: MIL-STD-1553B, CAN-Bus, SpaceWire
Radiation hardness: 100krad TID, 60MeV cm^2/mg SEL
In orbit lifetime: Up to 15 years
Input voltage range: 18V – 37V
ROSMAP-MP

ROSMAP-MP

Detector: Hamamatsu 8500C, Hamamatsu H12700, Photodiodes
Number of inputs: 64
Input charge range: 0 pC to -2.6 pC
Input charge range (ROSMAP-MP-80): 0 pC to -80 pC
Input charge range (ROSMAP-MP-200): 0 pC to -200 pC
Input charge range (ROSMAP-MP-1000): 0 pC to -1000 pC
Max event detection rate: 68k/200k/1M events/s (all channel/one channel/timing)
Shaping time: 1.4 μs
Charge value ADC resolution: 13 bit
Trigger threshold: Programmable
ROSSPAD

ROSSPAD

Detectors: Hamamatsu S14161-6050HS SiPM, SensL MICROFJ-60035-TSV SiPM
Application: Gamma cameras, spectroscopic detectors, scintillator based pixelated detectors, absorber in Compton cameras
Number of inputs: 64
Input charge range: -400 pC / -4 nC / -8 nC / -16 nC
Shaping time: 200 ns / 400 ns / 800 ns / 1600 ns
Trigger threshold: Programmable. 8 bit for each channel
Power consumption: Ca. 3.2 W
Max event detection rate: Ca. 20 000 frames per second
Charge value ADC resolution: 12 bit
Data interface: Ethernet
ROSSPAD Line Scanner

ROSSPAD Line Scanner

Application: X-ray and gamma-ray detector for industrial tomography
Sensitive area: 2 460mm2 (6.2mm x 396.8mm)
Number of pixels: 64
Energy range: 20 keV to 778 keV
Trigger threshold: Programmable.
Max event detection rate: Ca. 20 000 frames per second
Data interfaces: Ethernet
Power supply: 3.2 W
Size of the front-end: 480.4 mm x 80 mm x 38.6 mm
Size of the back-end: 70 mm x 40.9 mm x 80 mm
SRE3020

SRE3020

Detector: Cadmium Zinc Telluride (CZT)
Application: Radiation hot-spot location, isotope identification, nuclear plant monitoring, compton scatter collimation
Number of inputs: 121
Dynamic range: Up to to 3 MeV
Maximum event rate: 18 000 events/s
Detector bias voltage: 0 V to -2000 V
Data interface: Ethernet
Dimensions: 75 mm x 75 mm x 63 mm
Mass: Ca 200 g
Power consumption: Ca 4.5 W
SRE4001 and SRE4002 with and without CZT

SRE4001 and SRE4002 with and without CZT

Detectors: CZT
Application: Gamma cameras
Number of inputs: 256
Energy range SRE4001: 350keV in CZT
Energy range SRE4002: 700keV in CZT
Energy resolution: 5% FWHM at 122keV in CZT
Trigger threshold: Programmable, 15keV minimum
Outputs: Energy analog value, and digital address
Power consumption: 250mW
Outputs: Energy analog value, and digital address
XCS-1000

XCS-1000

Detectors: CZT or CdTe
Applications: NDT, Process Flow Tomography, Sorting, Security
Number of pixels: Up to 896 or 1024 (896x1, 448x1, 224x4 or 112x8)
Scalable: Yes, up to several meters
Spectral Channels: 6, 3 or 1
Input charge range: Up to 130 keV (customizable, higher energies possible)
Pixel pitch: 200μm, 400μm, 800μm or 1.6 mm
Event Rates: Up to 2*10^6 events/s/mm
Energy resolution: < 6.5 % FWHM at 122 keV (detectors only)
Data interface: Ethernet